1, TX series milling head TX series milling head is a universal power component. It is combined with milling workbench or power sliding table with various supporting components, and can form various forms of combined milling machine. The milling head is based on the sparse tooth face milling cutter. It can also be used for planar milling of parts such as steel, cast iron, non-ferrous metals and other parts with small diameter and dense tooth end mills. After installing the auxiliary tool stage, milling and milling shoulders can also be completed.
This series of milling heads are used in the plane milling and milling of the steel, cast iron and non-ferrous metal parts. The ordinary precision milling head is used for the rough milling, and the dense tooth end milling cutter can be used for the powerful milling. The high precision grade (G) milling head is used for high precision milling with the maximum feed rate of up to 2500mm/min. The highest precision plane of 0.01 ~ 0.03/1000, the surface roughness is less than or equal to 0.4. The milling head is divided into I type (manual movement and tightened sliding sleeve), and II type (with hydraulic automatic tool mechanism).
The milling head is equipped with four kinds of transmission: belt drive device, the spindle speed is high, used for processing non-ferrous metal; tail type transmission device, mainly used for vertical configuration; handle transmission device, suitable for frequent changes in cutting speed requirements; overhead type transmission device. It has a wide range of applications.
2, TA series boring head
The TA series boring head is in conformity with the standard of general components of JB1531-75 machine tool - boring head, and is widely used in the automatic line of combined machine tools and combined machine tools. This series of boring head is matched with the same size hydraulic slide or mechanical slide to form a boring combined machine tool to complete the uniaxial rigid coarse and fine boring process for cast iron, steel and non-ferrous metal workpieces.
This series of boring head is matched with the same size hydraulic slide or mechanical slide to form a boring combined machine tool to complete the uniaxial rigid coarse and fine boring process for cast iron, steel and non-ferrous metal workpieces. The maximum accuracy of the maximum boring accuracy IT7. can reach 1.6. special order to achieve manual transmission.
3, TD series power box
The TD series power box is a power source part of gear drive, which matches the spindle box to realize the main movement of machine tools, which is mainly applied to combined machine tools with multiple axle boxes and their automatic lines.
The power box of this series is a power source component of gear transmission. It matches the spindle box to realize the main motion of machine tool, which is mainly applied to modular machine tool with multiple axle boxes and its automatic line.
4, HJ series mechanical slide table
In order to realize feed movement using HJ series mechanical slide, horizontal and vertical, the power box installed in the mechanical sliding table (installed on the spindle). Drilling head, boring head, milling head, boring and facing a variety of components, with the completion of drilling, expanding, reaming, boring, scraping socket. End face, chamfer, face turning, milling and tapping.
In order to realize feed movement with mechanical slide, horizontal and vertical, the power box installed in the mechanical sliding table (installed on the spindle). Drilling head, boring head, milling head, boring and facing a variety of components, with the completion of drilling, expanding, reaming, boring, countersink, scraping end. Inverted angle, face turning, milling and tapping. A mechanical sliding table with a width of 320 millimeters wide, and a deep hole drilling procedure can be completed if a hierarchical feed device is installed.
The slide table is divided into 250, 400, 630, l000, 1600 millimeter according to the length of the stroke, which is divided into type I, II, III and IV. The user can choose according to the need. The length of the trip must be marked when the order is ordered. When the slide table is used for deep hole processing, it should also be marked with a hierarchical feed device.
Dongguan Longyou Hardware Machinery Manufacturing Co., Ltd. mainly R & D and production: Longmen precision precision milling machine, horizontal milling machine, precision milling machine double precision machining center, Longmen machine, precision rotary table, Longmen precision grinder, Longmen CNC milling machine, CNC milling machine CNC double, Longmen CNC grinding machine, block machine, ultra precision pneumatic rotary segmentation.